Menu

IPC 9503 PDF

0 Comments

IPC Moisture Sensitivity Classification for Non-IC Components. Content Provider Association Connecting Electronics Industries [IPC]. IPC, PWB Assembly Sol- dering Process Guideline for. Electronic Components. • IPC, Moisture Sensitiv- ity Classification for Non-IC. Components. and Use of Moisture/Reflow Sensitive Surface Mount Devices). This standard supersedes IPC Developed by ECA, IPC and JEDEC.

Author: Kegor Matilar
Country: Egypt
Language: English (Spanish)
Genre: Photos
Published (Last): 9 May 2009
Pages: 268
PDF File Size: 20.82 Mb
ePub File Size: 6.6 Mb
ISBN: 247-4-11845-407-8
Downloads: 35960
Price: Free* [*Free Regsitration Required]
Uploader: Vohn

Static generating materials should be avoided. A maximum of 5 devices shall be contained in a tray.

Packaging Requirement Codes

Surface mount components shall be suitable ipv vacuum pick up, include caps as applicable. Moisture Sensitive devices shall be packaged in moisture proof, conductive material or packaged in moisture proof antistatic material with external conductive field shielding barrier. Once a Tray is chosen all components of that size for the entire P. Solid board packaging is ideal for achieving exclusive. Items that are gold plated or have a 9530 finish or lower shall contain the following note marked on exterior of container: For shelf life requirements beyond one year place a in the Q.

Basin and Range Province PowerPoint. Exterior containers ip comply with uniform freight and national motor freight classification rules or regulations or other carrier rules, as applicable to the mode of transportation.

IPC – Moisture Sensitivity Classification for Non-IC Components

Matte finish waffle packs should be used if available. All waffle packs containing items that are ESD sensitive diodes, integrated circuits, etc. Tubes for Surface-Mounted Components Definition: Matrix Tray General Requirements: Each moisture barrier bag shall be marked with the part number, date code, quantity, and serial numbers of the PWBs enclosed.

  GRAVE MEMORY KALAYNA PRICE PDF

Gel Trays must be labeled on the cover and the bottom of the base with the supplier lot number and 95033 number, PO number and BAE part number.

Compliance Commitments related to the manufacture and. Moisture content may be assured by documented process controls or appropriate testing. Use of newsprint, excelsior, or loosed fill expanded polystyrene is not allowed as a means of cushioning.

Components will be covered upc a lintfree filter paper insert s between the top of the component and the bottom cover. Multiple boards in an MBB shall be separated by slip sheets or other appropriate materials such as pink poly bags.

Do not handle with bare hands; use clean, lint free cotton gloves when handling. Parts do not have to be pre-oriented, but must be face up. Use of any static generating material is strictly prohibited. Each moisture barrier bag may contain up to 10 PWBs of size in2 per side or greater, and smaller boards may be packaged up to 25 per bag. Suppliers should attempt to provide a best fit solution without incurring extensive tooling costs.

Packaging Requirement Codes

Once a Wafflepack is chosen all components of that size for the entire P. The packaging shall allow the polarity or part number markings to be visible for icp device.

Waffle pack dimensions should remain the same for subsequent lots of the same component type. SMI only General Requirements: This code shall only be used on product provided by through Integrated Supplier Partnering Agreements. Parts lpc be loaded consecutively from left to right, proceeding from top to bottom as viewed with the notch of the waffle pack positioned in the upper left hand corner with a consistent separation between rows and columns.

  GENERAL ANATOMY EIZENBERG PDF

The carrier shall be designed such that the component does not move when the carrier is opened ic the lead configuration does not change once the component is removed from the carrier.

Waffle pack capacity should be maximized within a manufacturing lot. Additional information on this requirement can be found at the following site: These carriers shall support the body of the component, maintain all physical lead dimensions, and allow visibility of the contact shall be such that no stress is applied to the leads.

So typically paper as it enters the waste stream An exception for through-hole radial components, bulkhead-mounted connectors, and cable connectors is best commercial practice. The carrier shall be of a construction to allow component removal without tooling. Tubes Only General Requirements: Moisture transfer refers to the fact that certain solid waste Waffle pack covers will also consists of black static dissipative material.

Components will be covered with a lint free filter paper insert s between the top of the component and the bottom of the cover 4.